DJI OM 4 | How to Use OM 4
Aug 24, 2023
DJI OM 4 | How to Use OM 4
#DJI #DJIOM4 #FirstUsehttps://bit.ly/2Yv1bfU http://bit.ly/DJICareRefreshOM4 https://m.me/DJISupport https://www.facebook.com/DJISupport/DJI https://twitter.com/DJISupport https://www.facebook.com/groups/dji.o …https://www.facebook.com/groups/djiosmo
Content
0.05 -> DJI OM 4 Tutorial Videos
2.65 -> In this video,
3.55 -> we will introduce how to set up DJI OM 4 for the first time,
7.475 -> and demonstrate how to use it
9.275 -> Open the package of the product,
11.325 -> and take out DJI OM 4 and its accessories
18.65 -> Before using, please download the DJI Mimo app
21.825 -> After installing the app,
23.525 -> you can choose the Magnetic Phone Clamp or Magnetic Ring Holder to mount your phone to the gimbal magnetically
29.65 -> Installing the Grip Tripod
31.8 -> Align the screw of the grip tripod with a quarter inch at the bottom of the gimbal
36.35 -> Then tighten the screw until both points are aligned
40.275 -> Then, unfold the tripod
42.85 -> Attaching the Phone to the Magnetic Phone Clamp
47.125 -> Place the magnetic phone clamp in the center of the phone
51.3 -> Make sure the DJI logo and camera are facing the same direction
56.775 -> Unfold the gimbal,
59.05 -> align the phone clamp with the magnetic point on the gimbal,
62.225 -> and attach it to OM 4
65.825 -> For small phones such as the iPhoneSE (with a thickness of
74 -> an additional silicone pad must be added before use
80.8 -> Attaching the Phone with Magnetic Ring Holder
84.125 -> Please remove the phone case before installation
87.15 -> 1. Clean the back of the phone with the wipes provided,
90.45 -> and then dry it
92.7 -> Attach the sticker to the center of the back of your phone.
96 -> Press the liner disc to squeeze out air bubbles
99.725 -> 2. Place the alignment guide on the back of the phone.
103.3 -> Adjust the position of the alignment guide to locate the center of the phone
108.2 -> 3. Attach the magnetic ring holder to the back of the phone
112.15 -> Make sure it is firmly attached
118.5 -> 4. Remove the alignment guide
123.25 -> After attaching the ring holder,
125.025 -> you need to wait for 12 hours before mounting it onto OM 4
129.175 -> Similar to the phone clamp,
130.675 -> all you need to do is align the ring holder and attach it to DJI OM 4
137.675 -> Press and hold the M button to power on the gimbal
141.25 -> Enable Bluetooth on your phone,
143.025 -> launch the DJI Mimo app,
145.4 -> log in or register with your DJI account,
152.975 -> and tap to activate.
155.2 -> Go one step further and purchase or activate the DJI Care Refresh plan
160.075 -> for affordable replacements with Express and more exclusive benefits
164.4 -> After activation is complete,
166.35 -> tap the camera icon in the top left corner of the screen to enter camera view
171.45 -> Press the M button once to switch between photo and video;
176.65 -> Press the M button twice to switch between landscape and portrait mode
181.175 -> Push the zoom slider up or down to control camera zoom
191.075 -> Push the joystick up or down to control the pitch of the gimbal
197.825 -> Push the joystick left or right to control the pan of the gimbal
205.025 -> Press the trigger twice to recenter the gimbal
208.3 -> Press the trigger three times to switch between the front and back cameras
213.375 -> Press the shutter button once to start recording.
218.4 -> Press and hold the M button until you hear a beep;
221.55 -> the gimbal will enter standby mode.
223.3 -> Press the trigger once to exit
225.45 -> Press and hold the M button until you hear two beeps;
228.425 -> the gimbal will power off
230 -> When you are finishing using OM 4,
232.1 -> remove the phone and store the gimbal as demonstrated.
235.75 -> Thank you for watching!
Source: https://www.youtube.com/watch?v=6luOtDmow0E
