Toyota Safety Sense 3.0 Settings & Controls Overview | Toyota

Jul 29, 2023

Toyota Safety Sense 3.0 Settings & Controls Overview | Toyota

TSS (Toyota Safety Sense) is an advanced suite of active safety features that has undergone several enhancements since its introduction in 2016. This video will provide an overview on how to adjust various settings for the driver assistance systems that make up the TSS 3.0 Suite. Watch more safety videos: • Toyota Safety Sen…

Learn more: https://www.toyota.com/safety-sense/

Feature available for most of the following models: 2023 bZ4x, 2023 Corolla Cross, 2023 Corolla Cross Hybrid, 2023 Corolla Hatchback, 2023 Prius, 2023 Prius Prime, 2023 Toyota Crown, 2023 GR Corolla

Subscribe for more Toyota videos: http://bit.ly/ToyotaSubscribe

Connect with Toyota USA online:
Visit the Toyota WEBSITE: http://bit.ly/ToyotaSite
Like Toyota on FACEBOOK: http://bit.ly/ToyotaUSAFB
Follow Toyota on TWITTER: http://bit.ly/ToyotaTwitter
Follow Toyota on INSTAGRAM: http://bit.ly/ToyotaInsta

In this Toyota video, learn about the settings and controls of TSS 3.0.

#Toyota #TSS #ToyotaSafetySense

Content

0 -> (lively music)

1.14 -> - [Narrator] Toyota Safety Sense, or TSS,

3.63 -> is an advanced suite of active safety features

6 -> that has undergone several enhancements

7.77 -> since its introduction in 2016.

10.297 -> This video will provide an overview of

12.45 -> how to adjust various settings

14.13 -> for the driver assistance systems

15.63 -> that make up the TSS 3.0 suite.

18.24 -> Most of these are managed through

19.77 -> the Settings menu of the vehicle's multi-information display

22.71 -> on the instrument panel,

23.82 -> which is typically controlled through

25.29 -> the directional switches on the steering wheel.

28.14 -> Let's get started.

29.682 -> (lively music)

31.89 -> The Pre-Collision System with Pedestrian Detection

34.38 -> is designed to help detect a vehicle, pedestrian,

37.08 -> bicyclist, or motorcyclist,

39 -> and provide an audio and visual forward collision warning.

42.96 -> If the driver does not react to the warning,

45.09 -> the system may provide automatic emergency braking.

49.08 -> Drivers have the option to adjust the warning timing for PCS

52.29 -> to one of three settings.

54.78 -> To adjust the warning timing,

56.31 -> select the Settings menu and press OK.

60.12 -> Next, select PCS and press and hold OK

63.93 -> to access the PCS settings.

66.42 -> From here, select Warning Timing

68.73 -> and press OK to change to the desired setting.

72.51 -> Each time OK is pressed, the warning timing will change.

76.29 -> Please note that,

77.13 -> when the pre-collision warning timing is changed,

79.62 -> the emergency steering assist timing will also be changed.

83.13 -> Additionally, when the latest setting is selected,

85.38 -> the emergency steering assist,

87 -> excluding the active steering function, if equipped,

89.67 -> will not operate in most cases.

92.91 -> Finally, when Dynamic Radar Cruise Control is on,

95.49 -> the pre-collision warning operates at an earlier timing,

98.34 -> regardless of the driver's setting.

100.95 -> Drivers can also opt to disable the PCS.

104.16 -> To do this, select the PCS icon from Settings,

107.46 -> and then press and hold OK on the steering wheel controls

110.67 -> until the setting screen is displayed.

112.68 -> From here, select the PCS icon and then press the OK button.

117.06 -> A prompt will appear on the multi-information display

119.88 -> and ask to confirm before disabling the system.

123 -> Select Yes and press the OK button one more time to confirm.

127.92 -> An amber PCS icon will be illuminated

130.65 -> to indicate that the system is off.

132.96 -> The system is automatically enabled

135.12 -> each time the engine switch is turned to on.

137.782 -> (lively music)

144.87 -> Lane Departure Alert with Steering Assist is designed to

147.63 -> issue an audio or visual lane departure warning

150.36 -> if an inadvertent lane departure is detected

152.7 -> while driving at speeds above 30 miles per hour.

155.79 -> If the driver does not take corrective action,

158.16 -> the system is also designed to provide

160.02 -> gentle corrective steering for lane keeping assistance.

163.08 -> Drivers have the option to adjust the system's alert timing

166.05 -> or turn it off completely.

167.94 -> Select Settings and then select LDA and press and hold OK.

170.573 -> Select Settings and then select LDA and press and hold OK.

174.27 -> When the Settings screen is displayed

175.92 -> on the multi-information display,

177.48 -> select LDA and then press OK to turn the system on or off.

182.64 -> LDA alert types can also be adjusted

184.89 -> from the LDA settings menu.

186.78 -> Then select Alert Options from the LDA settings menu

190.02 -> and then press OK to change to the desired setting

192.78 -> for either vibration or beep.

195.78 -> To change the alert timing, select Alert Timing,

198.84 -> and then press OK to change to the desired setting.

202.38 -> Each time OK is pressed, the alert timing changes.

206.324 -> (lively music)

209.16 -> Dynamic Radar Cruise Control, or DRCC,

212.16 -> is an adaptive cruise control system that is designed to be

214.92 -> set at speeds above approximately 20 miles per hour.

218.34 -> When activated, DRCC uses a camera and radar sensor

222.36 -> to judge vehicle-to-vehicle distance

224.34 -> to help maintain a preset distance from the vehicle ahead.

227.88 -> DRCC or conventional cruise control can be selected by

231.06 -> pressing the Driving Assist Mode Select switch.

234.75 -> Pressing this switch

235.65 -> toggles between the two cruise control modes.

240.69 -> To activate, select the mode

242.28 -> via the Driving Assist Mode Select switch,

246.03 -> then accelerate to the desired speed,

249.24 -> and press the Driving Assist switch

251.31 -> to set the vehicle speed.

254.4 -> To adjust vehicle-to-vehicle distance when using DRCC,

257.97 -> press the Vehicle-To-Vehicle Distance switch

260.19 -> to toggle between the four following distance settings.

264.043 -> (lively music) (computer beeping)

269.67 -> The set speed can be increased by

271.5 -> about one mile per hour in either mode

273.6 -> by a single press of the + Resume switch

277.17 -> or increased by larger increments by holding the switch.

281.04 -> Similarly, the set speed can be decreased

283.47 -> by pressing or holding the - switch.

286.77 -> To cancel either cruise control mode, press the brake pedal

289.83 -> or the Cancel switch on the steering wheel.

292.29 -> This will turn the system off

293.88 -> but retain the last set speed in memory,

296.25 -> enabling the driver to resume operations at that set limit

299.28 -> by pressing the + Resume switch.

301.8 -> However, pressing the Driving Assist switch

303.9 -> when cruise control is set

305.1 -> switches the cruise control off completely,

307.26 -> erasing the memory of the previously set speed.

310.249 -> (lively music)

317.25 -> When Dynamic Radar Cruise Control is enabled

319.59 -> and lane markers are detected,

321.27 -> Lane Tracing Assist, or LTA,

323.61 -> uses the lines on the road and/or preceding vehicles

326.49 -> to provide active driving assistance

328.56 -> and help keep the vehicle centered in its lane.

331.29 -> When LTA is activated,

332.94 -> the Emergency Driving Stop System, or EDSS,

336.33 -> is also activated.

338.19 -> Additionally, LTA is active

340.08 -> only when Dynamic Radar Cruise Control has a speed set.

344.88 -> A quick press of the LTA switch on the steering wheel

347.88 -> can activate or deactivate this feature.

350.599 -> (lively music)

358.11 -> Automatic High Beams are designed to help drivers

360.54 -> see more clearly at night

361.98 -> and operates at speeds above 21 miles per hour.

365.55 -> The system is designed to detect

367.14 -> the headlights of oncoming vehicles

368.97 -> and taillights of preceding vehicles,

370.89 -> then automatically toggle between

372.66 -> high and low beams accordingly.

375.48 -> To activate the system, turn the headlights on

378.12 -> or switch to Auto and press the Automatic High Beam switch.

384.124 -> The high beams can still be activated manually

386.85 -> by pushing the headlight lever forward.

389.43 -> Low beams can be activated manually

391.47 -> by moving the headlight lever back to its standard position

394.53 -> with Automatic High Beams turned off.

397.495 -> (lively music)

402.51 -> Road Sign Assist, or RSA, is designed to detect speed limit,

406.71 -> "stop", "do not enter", "yield" signs,

409.56 -> and certain warning signs, and then display them on the MID.

414.657 -> The driver has the option to turn the system off or on

417.69 -> from the Settings menu by selecting RSA and pressing OK.

423.09 -> For additional RSA settings,

424.83 -> select RSA from the Settings menu, then press and hold OK.

429.776 -> (lively music)

435.81 -> Proactive Driving Assist, or PDA,

438.3 -> is available on certain TSS 3.0 equipped vehicles

441.87 -> and provides gentle braking into curves

444.12 -> as well as gentle braking or steering

445.92 -> to help support driving tasks,

447.72 -> such as distance control between the driver's vehicle

450.48 -> and a preceding vehicle, pedestrian, or bicyclist.

454.08 -> Drivers can adjust PDA's sensitivity

456.57 -> within the Settings menu.

458.52 -> Select PDA and then press and hold OK

462.21 -> until the Settings screen is displayed.

465.15 -> Select Sensitivity and then press OK

468.12 -> to change to the desired setting.

470.206 -> (lively music) (computer beeping)

474.48 -> It should also be noted that the individual features of PDA

477.69 -> can be turned on or off as well.

480.09 -> From the PDA settings menu, select Deceleration Assist, DA,

484.74 -> Steering Assist, SA, if equipped,

487.02 -> or Obstacle Anticipation Assist, OAA,

490.088 -> and press OK to turn the feature off.

493.62 -> Finally, the driver can also select

495.48 -> to disable the entire system.

497.88 -> From the settings menu,

498.96 -> select PDA and then press OK to toggle the system off.

502.947 -> (lively music)

505.47 -> That's a quick overview of how to adjust

507.45 -> the various settings found within Toyota Safety Sense 3.0.

511.83 -> Each Toyota vehicle may differ slightly,

514.14 -> so please refer to the Owner's Manual

516.12 -> for specific system information.

518.43 -> To learn more about Toyota Safety Sense,

520.68 -> be sure to visit toyota.com/safety-sense.

524.771 -> (upbeat musical jingle)

Source: https://www.youtube.com/watch?v=nNOqGJkm1aM