How-to Video: Baby Trend Sit N' Stand® Double 2.0 Stroller
How-to Video: Baby Trend Sit N' Stand® Double 2.0 Stroller
Frame Set Up 0:23
Front Wheel Assembly 0:37
Rear Axle Assembly 0:45
Child Tray 1:30
Front Canopy 1:45
Parent tray 1:55
Rear Canopy 2:11
Securing the Basket 2:35
To Fold Stroller 2:42
Jump Seat 3:02
Streamlined, single front wheels allow for an easy push and a more compact footprint for the new Sit N’ Stand Double 2.0. Your two will stroll in quality, comfort and style with this redesigned favorite of growing families. The Sit ‘N Stand combines maximum comfort and safety with sleek style and will make your trip to the park easy and enjoyable. Both seats have a 5-point safety harness for maximum security.
The front seat has a removable 2 panel fully ratcheting canopy, and the rear seat has a fixed canopy with visors to block the sun. This Stroller also includes a hassle free one-hand fold, an extra-large basket for all your travel necessities and a parent console with two cup holders and a covered compartment.
Visit us at https://babytrend.com/
Content
0.299 -> thank you for visiting the Baby Trend
2.22 -> video Channel today we will be
4.2 -> demonstrating how to assemble the
5.88 -> sentence Stand double 2.0 stroller
8.4 -> before beginning putting the stroller
10.38 -> together please make sure you have all
12.719 -> included Parts you can find a list of
15.179 -> these parts on the parts page in the
17.58 -> instruction manual
18.96 -> all instructions explained in this video
21.3 -> can be found in the instruction manual
24.18 -> start with unfolding the stroller pull
26.1 -> out and rotate the fold latch and use
27.9 -> one hand to hold the handle and tilt the
29.82 -> stroller forward push the stroller open
31.5 -> firmly with the other hand firmly pull
33.6 -> upward on the stroller handle to open
35.34 -> the frame make sure the frame fully
37.02 -> clicks into position to assemble the
38.94 -> front wheels insert each wheel into the
41.16 -> housing on both sides of the stroller
42.78 -> frame line up the peg with the housing
44.579 -> and firmly push into place remove the
47.219 -> pin in one washer from both ends of the
49.62 -> rear axle insert the rear wheel into the
52.32 -> axle bar with the teeth facing Inward
54.6 -> and insert the second washer place the
56.82 -> pin into the hole of the axle bar and
59.039 -> then rotate into a locked position from
61.559 -> there align the tabs on the cap with the
63.719 -> holes on the wheels push the cap into
65.76 -> the wheel to close the axle assembly
67.92 -> make sure to press firmly with your palm
69.9 -> to insert the cap completely repeat
71.939 -> these steps for the other side lastly
74.22 -> align both sides of the rear axle and
76.68 -> press in at the same time with the brake
78.54 -> levers facing outward ensure both pins
81.119 -> click into place be sure to pull on the
83.58 -> front and rear whales to ensure all are
85.799 -> securely attached to the stroller the
87.9 -> stroller should not be used if Wheels do
89.939 -> not lock into place to attach the child
92.28 -> tray align the tray to the connectors
94.32 -> and push down to access the child's seat
96.72 -> pull one release trigger and lift up the
98.939 -> tray simultaneously either side of the
101.22 -> child tray will lift and rotate out of
103.32 -> the way to allow access to the stroller
105.479 -> seat to install the front canopy align
107.82 -> both sides of the canopy Clips onto the
109.92 -> plastic tabs Slide the clips forward to
112.02 -> lock into place ensure the canopy is
114.06 -> completely snapped into position locate
116.34 -> the three open slots on the tray and
118.38 -> face them toward the canopy to attach
120.42 -> the parent tray insert the hole on the
122.579 -> parent tray into the pin on the handle
124.38 -> align the opposite side of the tray and
126.24 -> press down until you hear a click make
128.16 -> sure you do not put your finger
129.36 -> underneath to avoid a finger pinch if
131.76 -> you receive the rear canopy unattached
133.62 -> start by lining up the fittings of the
135.48 -> lower connection and pushing inward
137.099 -> pinch the straps and insert into the
138.959 -> trace plot hook all three canopy straps
141.3 -> to the pertaining tray tabs ensure all
143.4 -> fabric panels are attached to each
145.2 -> corresponding tab secure the canopy
147.18 -> sides with the bands around the tabs on
148.92 -> the rear side of the frame fasten each
151.14 -> hook and strap onto the stroller frame
152.819 -> repeat for the other side
154.98 -> ensure all straps on the storage basket
156.959 -> are secured if they are not secured
159.18 -> reference your manual for further
160.739 -> instructions
161.94 -> now we will demonstrate how to fold the
163.92 -> stroller start by pushing the front
165.599 -> canopy forward before folding the
167.16 -> stroller pull the stroller backward to
168.9 -> position the front wheels forward and
170.459 -> engage the brakes Slide the thumb latch
172.5 -> to the left and squeeze the pull trigger
174.239 -> while pushing forward on the handle push
176.22 -> upward on the handle and use the fold
177.78 -> assist strap to close the stroller and
179.7 -> latch it closed
184.86 -> to use the drum seat remove the rear
187.019 -> child tray rear canopy and rear seat
189.18 -> start by detaching the recline strap
191.159 -> from the frame by folding and sliding
192.78 -> the strap through the d-ring located on
194.94 -> the end of the strap repeat for the
196.44 -> other side
197.94 -> remove any remaining straps that are
199.8 -> attached to the stroller frame
203.58 -> place the stroller on its side and
205.319 -> remove the attachments underneath the
206.819 -> rear seat
211.319 -> to reattach the rear seat reverse the
213.72 -> steps above
239.459 -> thank you for watching we hope you love
241.319 -> your new stroller
Source: https://www.youtube.com/watch?v=r0es0y21Zns